Algema BLITZLADER 2, Руководство по эксплуатации

Страница: 68 / 108

5 Care and maintenance Eder GmbH
68 / 108 Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021
Environmentally harmful substances such as oil, grease, acid, brake dust!
These substances can enter the environment, e.g. groundwater,
during cleaning.
°
°
Comply with country-specific environmental protection conditions.
Cleaning of the car transporter only on a suitable washing
place.
Fluids, in particular hydraulic oils and also engine oils, as well as
lubricants and liquefied or compressed gaseous products may
only be collected in suitable containers and disposed of in
accordance with regulations (in accordance with EC Directive
2008/98/EC and national regulations)
.
Label contents with
appropriate warnings.
° Dispose of protective clothing in sealable plastic bags after
wearing.
Unsuitable cleaning agents such as chemicals, salt, acids and
bases!
Surface coating/materials can be attacked or disrupted.
°
°
Do not use abrasive, aggressive cleaning agents such as ben-
cine, steel wool, wire brushes, sandpaper, etc.
°
Do not clean brake and hydraulic hoses with gasoline, benzene,
petroleum or mineral oils.
Only use weakly acidic to weakly alkaline cleaning agents with a
ph value of 6-10.
°
Use only soft clean cloth rags or brushes.
°
Only use care products approved for the respective material.
Use of a high-pressure cleaner/steam jet device!
Damage or destruction of components and surfaces due to excessive
pressure, excessive water temperature.
°
Observe the operating instructions of the cleaning device.
° Do not hold the water jet on one point longer.
° Do not shine directly on sensitive components, e.g. lighting
system, plug, cable, ball coupling, signage, stickers, etc.
Eder GmbH
4. Inspections and maintenance to be performed
1. Testing the tires and wheels
5 Care and maintenance
Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021 69 / 108
Even with little-used car transporters, the tires are subject to an aging
process due to weather influences such as sunlight, cold, etc. Check the
condition of the tires/wheels regularly. We recommend changing the tires
after 6 years.
Sight the tires all around.
°
Watch out for cracks or foreign bodies.
Check the tire pressure. Information on the required tire pressure
can be found below in this operating manual or on the sticker on the
car transporter.
°
Top up with air if necessary.
Check the tread depth of the tire (minimum tread depth in Germany
according to StVO 1.6 mm, a minimum tread depth of 4 mm is
recommended).
°
Replace the tire if necessary.
Check that all wheel bolts are tight.
°
If necessary, tighten all wheel bolts crosswise with a torque
wrench.
Tightening torque of wheel bolts (identical for both rear axles): See operating
instructions for base vehicle.
The values for the tightening torque of the wheel bolts may vary slightly
depending on the base vehicle and rim design. If no values are available
for the base vehicle, a tightening torque of 200 Nm can be assumed as an
average value.
Tire pressure on the rear axles (identical for both rear axles): See operating
instructions for base vehicle.