Algema BLITZLADER 2 Скачать руководство пользователя страница 54

Страница: 54 / 108

4 Operation and running

4.9 Emergency operation

Eder GmbH

54 / 108

Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021

4.9.1 Emergency operation of electrohydraulics

In the event of a failure of the electrohydraulics, the hydraulic functions plateau up and
down and drive ramps in and out can also be operated with a hand pump. The emergency
control is located in the right front toolbox under the plateau.

Emergency operation

electrohydraulics:

1. Hand pump
2. Pull valve button drive-up ramp

(top) = extend drive-up ramps
Press = retract drive-up ramps

3. Pull valve knob plateau

(down) = tilt plateau up
Press = tilt plateau
down

4. Pump lever

Eder GmbH

4 Operation and running

Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021

55 / 108

Pull press

•

To change from "pull" to "push" on the valve knob, turn the valve knob slightly to

the right.

•

To change from "push" to "pull" on the valve knob, turn the valve knob slightly to

the left.

•

Remove the pump lever (4) from the holder and insert it into the receptacle provided

for this purpose in the upper part of the hand pump (1).

•

With one hand, pull or push the appropriate valve knob (2 or 3) for the desired function

as far as it will go. At the same time, use the second hand to operate the hand pump

by moving the pump lever (4) up and down.

Important: The

valve knob must be pulled or pressed to the stop at all times during

the procedure.

•

After the procedure, stow the pump lever back in the holder provided for this

purpose.

The hazard warnings for operating the tilting platform also apply in
emergency operation (

see "Operating the tilting platform", page 21

Содержание BLITZLADER 2













































































































Результаты поиска

Содержание BLITZLADER 2

Отзывы:

Бренды по названию

Популярные бренды

Algema BLITZLADER 2, Руководство по эксплуатации

Результаты поиска

Содержание BLITZLADER 2

Отзывы:

Бренды по названию

Популярные бренды