Algema BLITZLADER 2, Руководство по эксплуатации

Страница: 30 / 108

4 Operation and running Eder GmbH
30 / 108 Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021
• Secure the loaded vehicle ( see "Securing the loaded vehicle", page 23 ).
•
Detach the rope hook from the loaded vehicle and hook it into the storage eye (4).
• Pull in the rope until it hangs loosely.
• Finally, activate the freewheel of the cable winch.
The winch is used for lashing the vehicle!
Vehicle or cable winch may be damaged.
Never use the winch to tie down the vehicle.
After loading, reactivate the winch freewheel. If the winch freewheel
remains deactivated, unintentional operation (e.g. radio remote control in
the trouser pocket) may cause damage to the winch, the storage eyelet
or the loaded vehicle!
The battery voltage is not monitored during winch operation. Due to the
high current demand of the cable winch, the vehicle batteries may be
discharged after a short time when the engine is not running.
A figure-of-eight sling is supplied with every
car transporter with winch. The figure-of-
eight sling serves as an aid if the hook of
the cable winch cannot be easily attached
to the vehicle to be loaded. To do this, pass
the sling through the towing eye or a load-
bearing part of the vehicle to be loaded. If
necessary, slightly compress the loops of
the sling. Then hook both loops into the
hook of the cable winch as shown.
The figure-of-eight loop is damaged!
Injuries caused by the figure-of-eight
sling The figure-of-eight sling can tear.
° The
same criteria apply as for the rope of the rope winch ( see
"Checking steel ropes ", page 72 ).