Algema BLITZLADER 2, Руководство по эксплуатации

Страница: 26 / 108

4 Operation and running Eder GmbH
26 / 108 Operating Instructions Algema Blitzlader 2 Air - Edition
04/2021
Non-adapted steering movements during loading!
The vehicle to be loaded may fall from the drive-up ramps or from the
plateau.
°
Drive the vehicle straight onto the car transporter, if necessary call
in a guide.
•
• On the loaded vehicle, apply the parking brake and engage the lowest gear or, in the
case of automatic transmission, move the selector lever to the P position.
• Tilt the plateau and retract the drive-up ramps ( see "Tilt plateau operation", page
21 ).
Secure the loaded vehicle ( see "Securing the loaded vehicle", page 23 ).
4.1.6 Loading with cable winch*.
Get out of the loaded vehicle!
Fall from the plateau.
°
°
°
When getting out of the loaded vehicle, hold on to the handles
provided for this purpose in the area of the driver's door, on the
door frame or on the roof.
Leave the plateau in the tilted-up state to the rear.
If necessary, close the driver's door of the loaded vehicle
after tipping it off the ground.
Unintentional rolling back or acceleration of the vehicle to be
loaded!
People can be hit or run over.
°
No persons are allowed on the platform, the ramps or behind the
car transporter during loading.