Algema BLITZLADER 2, Руководство по эксплуатации

Страница: 79 / 108

Eder GmbH 5 Care and maintenance
Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021 79 / 108
5.4.7 Lubricating and greasing moving parts
The tilting bearings are equipped with maintenance-free plain bearings. Regular lubrication
or greasing of the parts is not necessary. Likewise, all joints on the tan-
dem running gear is equipped with maintenance-free rubber bushings or plain bearings.
To ensure the proper functioning of the drive-up ramps, the center ramp*, the tilt sensors
and the tilt scissors, some maintenance points must be lubricated regularly.
Support roller at the stern and part of the
lateral support surface on the railing under
the drive-up ramp
Guide roller at the end of the ramp
•
•
• The lateral contact surfaces of the drive-up ramps (4x) and the center ramp* (2x) in the
area of the railing and the frame must be sprayed with a service spray suitable for
aluminum and plastic.
The support rollers at the rear under the drive-up ramps (4x) and the center ramp*
(4x) must be sprayed with a service spray suitable for aluminum and plastic. Make
sure that the spray has good creeping properties and can penetrate laterally between
the support rollers and frame.
Spray the guide rollers at the end of the drive-up ramps (4x) and the center ramp*
(2x) with a service spray suitable for aluminum and plastic. Make sure that the spray
has good creeping properties and can penetrate laterally between the guide rollers
and guide carriages.
•
Lightly grease the stainless steel cable to reduce friction on the deflection pulleys.
The deflection rollers are equipped with a maintenance-free plain bearing.