Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 745 / 931

Intrusion Detection System
Left running head:
Chapter name (automatic)
712
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
INTRUSION SENSOR
intrusion sensor <name> snort [ no threshold | threshold < 1-
4294967295 > < 1-4294967295 >]}
D
ESCRIPTION
Enter this command in the Firewall configuration mode. This command is used to
create an IDS sensor based on Snort.
Use ‘threshold’ keyword to configure the threshold for the sensor.
Use ‘no threshold’ keyword to remove threshold configured for the sensor.
P
ARAMETER
E
XAMPLE
ALU(config)#firewall
ALU(config-firewall)#intrusion sensor sensor1 snort threshold
10 1000
ALU(config-firewall-intrusion-sensor-sensor1)#
INTRUSION SNORT
intrusion snort
D
ESCRIPTION
Enter this command in the Firewall configuration mode. This command enters the
snort configuration mode.
P
ARAMETER
None.
E
XAMPLE
ALU(config)# firewall
ALU(config-firewall)# intrusion snort
ALU(config-firewall-intrusion-snort)#
Parameter Description
name
Name of the sensor.
1-4294967295
Threshold number. This denotes the
number of packets to be sent every
second.
1-4294967295
This denotes the threshold time in
milliseconds inside which if the specified
threshold number of packets are
received, those packets are treated as
attacks.
no threshold
Remove threshold from sensor.