Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 528 / 931

show ip ospf interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
495
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
SHOW IP OSPF INTERFACE
show ip ospf [ <1-65535> ] interface [{ GigabitEthernet | Serial }
< slot/port >| Loopback < 0-14487 >| statistics }]
D
ESCRIPTION
Enter this command in Super User mode or Router Configuration mode. This
command displays OSPF-related interface information.
P
ARAMETERS
E
XAMPLE
E
XAMPLE
1
ALU# show ip ospf interface
GigabitEthernet7/0 is up, line protocol is up
Internet Address 1.1.1.2/24, Area 0
Process ID 1, Router ID 1.1.1.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 1.1.1.2, Intf address 1.1.1.2
Backup Designated router (ID) 1.1.1.1, Intf address 1.1.1.1
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:03
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 1.1.1.1 (Backup Designated Router)
Suppress hello for 0 neighbor(s)
Message digest authentication enabled
GigabitEthernet7/1 is up, line protocol is up
Internet Address 2.2.2.2/24, Area 1
Process ID 1, Router ID 1.1.1.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State BDR, Priority 1
Designated Router (ID) 6.6.6.6, Intf address 2.2.2.1
Backup Designated router (ID) 1.1.1.2, Intf address 2.2.2.2
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:03
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 6.6.6.6 (Designated Router)
Suppress hello for 0 neighbor(s)
ALU #
Parameter Description
1-65535
Process ID. If this argument is included,
only information for the specified routing
process is displayed.
{ GigabitEthernet | Serial }
< slot/port > Loopback < 0-14487 >
Interface name with its slot and port
number.
statistics
Displays the OSPF statistics.