Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 692 / 931

crypto ike identity
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
659
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
CRYPTO IKE IDENTITY
crypto ike identity <name> [ force ]
D
ESCRIPTION
This command configures an IKE identity. Entering this command changes the
mode to IKE identity mode.
P
ARAMETERS
E
XAMPLE
ALU(config)# crypto ike identity exampleIdentity
CRYPTO IKE KEY
crypto ike key <key-string> [ vrf <name> ] peer < peer-address>
[ force ]
D
ESCRIPTION
This command is used to configure a pre-shared key. The Pre-shared key is used
to authenticate peers. This key should be same on both the IPsec gateways. It is
denoted in the form of a key-string.
P
ARAMETERS
Parameter Description
name
Identifies the IKE identity.
Parameter Description
key-string
Denotes an alphanumeric unique key string. The
IKE key is given by means of a key-string and
supports both string and hex values.
The IKE key is given by means of a key-string.
Currently, the preshared-key length is restricted to
128 characters, and the minimum length is 8
characters.
vrf < name >
Name of the VRF.
peer-address
Peer address/ host name for identification.
force
Edits or modifies the IKE keys, which are already
configured.