Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 207 / 931

Per VLAN Spanning Tree +
Left running head:
Chapter name (automatic)
174
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
P
ER
VLAN S
PANNING
T
REE
CLI C
OMMANDS
NO SPANNING
-
TREE
no spanning-tree [ vlan <1-4094> ]
The “no” command disables the configured spanning-tree for a VLAN. By default,
spanning tree is disabled.
NO SPANNING
-
TREE VLAN COST
no spanning-tree [ vlan <1-4094> ] cost < 1-65535 >
This command is entered in the Interface Configuration mode. The “no” command
resets the PVST+ cost to its default value. The default PVST+ cost is 4.
NO SPANNING
-
TREE VLAN FWD
-
TIME
/
HELLO
-
TIME
/
MAX
-
AGE
/
PRIORITY
no spanning-tree [ vlan <1-4094> ]{ forward-time <4-30> | hello-time
<1-10> | max-age<6-40> | priority <0-65535> }
The “no” command resets the PVST+ Forward-time/Hello-time/Maximum-age/
Bridge priority to its default.
The default for each of the parameter is given below:
•
Forward time: 15 seconds
•
Hello-time: 2 seconds
•
Max-age: 20 seconds
•
Priority: 32768
Note: The following formula has to be satisfied when configuring the forward-time, hello-
time, and max-age:
((forward-time - 1) * 2) >= max-age &
& max-age >= ((hello-time + 1) * 2).
NO SPANNING
-
TREE VLAN PORT
-
PRIORITY
no spanning-tree [ vlan <1-4094> ] port-priority <0-255>
This command is entered in Interface Configuration mode. The “no” command
resets the PVST+ port-priority to its default value. The default PVST+ port-priority
is 128.
NO SPANNING
-
TREE VLAN SPANNING
-
DISABLED
no spanning-tree [ vlan <1-4094> ] spanning-disabled
The “no” command enables the Spanning-tree on a specified interface.