Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 409 / 931

Protocol Independent Features
Left running head:
Chapter name (automatic)
376
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
E
XAMPLE
ALU# show route-map
route-map test, permit, sequence 1
Description:
Exit Policy:
Match clauses:
community (community-list filter) : 1
ip address (access-lists) : prefix-list testprefix
Set clauses:
route-map test, deny, sequence 2
Description:
Exit Policy:
Match clauses:
Set clauses:
ALU#
ALU# show route-map testset
route-map testset, permit, sequence 5
Description:
Exit Policy:
Match clauses:
ip address (access-lists) : 1
Set clauses:
metric 10
route-map testset, permit, sequence 10
Description:
Exit Policy:
Match clauses:
Set clauses:
metric 20
ALU#
Parameter Description
route-map
Name of the route map.
permit
Indicates that if match condition is satisfied, then the route-
map result is permit.
sequence
Number that indicates the position a new route map is to
have in the list of route maps already configured with the
same name.
Match clauses
tag
Match criteria - conditions which needs to be matched.
Set clauses
metric
Set actions - particular actions to perform if the criteria
enforced by the match commands are met.
Policy routing
matches
Displays the number of packets and bytes that have been
filtered by policy routing.