Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 606 / 931

source-nat host
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
573
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
SOURCE
-
NAT HOST
[ <1-65535> ] match [{ all | any }] < match-list name> source-nat host
{ <ip-address|host-name> } [ port-range {< 2048-65535 > < 2048-
65535 >}| static ]
D
ESCRIPTION
Enter this command in the NAT configuration mode. This command is used to
configure a SNAT with host IP address.
Note: If no address is configured, the IP address of the egress interface on which the NAT
policy is applied will be used.
P
ARAMETERS
Note: Currently, ‘Hostname’ option is not supported. Only host IP address can be
configured.
D
EFAULT
V
ALUE
None.
E
XAMPLE
ALU(config-nat-N1)# match m1 source-nat host 192.168.10.91
Parameter Description
1-65535
The range for the NAT policy rule. This rule number signifies
the priority of a rule.
match
[{ all | any }]
< match-list
name>
This command forms a match-list of the Common
Classifiers that are pre-configured. In this type of match, the
relevant action is performed even if one rule in the list is
satisfied.
source-nat
Type of NAT, here it is the SNAT.
ip-address
IP address of the host.
host-name
The host name.