Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 156 / 931

snmp-server user
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
123
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
SNMP
-
SERVER USER
snmp-server user < user-name > [ auth { MD5 | SHA } < auth-password >
priv DES < privilege-password >]
D
ESCRIPTION
This command is used to configure a SNMPv3 user.
P
ARAMETERS
P
LATFORMS
S
UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# snmp-server user user123 auth MD5 pass123456 priv
DES test123456
R
ELEASE
H
ISTORY
Release 2.3: command was added.
Parameter Description
user-name
A string identifying the name of the
SNMP user.
auth
Indicates that the message sent on
behalf of the user is to be authenticated.
MD5 | SHA
Uses HMAC MD5/SHA algorithm for
authentication.
auth-password
Password specified for authentication
protocol.
Authentication password should be
minimum of 8 characters.
priv
Indicates the message sent on behalf of
the user is to be protected from
disclosure.
DES
Algorithm used for encryption of the
date.
privilege-password
Privacy password used for encryption/
decryption of the message sent by the
user. This should be a minimum of 8
characters.