Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 633 / 931

Filter and Firewall
Left running head:
Chapter name (automatic)
600
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
CHANGE
change {< 1-65535 > < 1-65535> }
D
ESCRIPTION
This command is used in the Firewall Configuration mode. Use this command to
change the priority of a specific configured firewall policy rule.
P
ARAMETERS
E
XAMPLE
Consider the following configuration:
ALU(config)# firewall
ALU(config-firewall)# policy P1
ALU(config-firewall-P1)#
10 match m1 permit
20 match m2 deny log
30 match m3 permit
40 match m4 deny reset
In the above sequence, if m4 has a priority 40. Use the “change “ keyword to
change the priority of m4.
ALU(config-firewall)# policy P1
ALU(config-firewall-P1)# change 40 15
Parameter Description
1-65535
Denotes the firewall policy rule number.
This rule number signifies the priority of
a rule.