Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 386 / 931

match interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
353
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
MATCH INTERFACE
match interface < interface-name >
D
ESCRIPTION
Enter this command in the Route-Map Configuration mode. This command
matches the specified next hop route out of one of the interfaces specified.
P
ARAMETERS
D
EFAULT
V
ALUE
No match interfaces are defined.
E
XAMPLE
ALU(config-route-map)# match interface GigabitEthernet 7/0
MATCH IP ADDRESS
match ip address { <1-99 >| <1300-2699 >| <access-list name>|prefix-
list <prefix-list name> }
D
ESCRIPTION
This command is entered in the Route-map Configuration mode. This command is
used to match a destination network number address that is permitted by a
standard access list, an extended access list, or a prefix list, or perform policy
routing on packets.
P
ARAMETERS
D
EFAULT
V
ALUE
No access list numbers or prefix lists are specified.
E
XAMPLE
ALU(config-route-map)# match ip address prefix-list testprefix
Parameter Description
interface-name
Name of the interface.
Parameter Description
1-99
Standard IP access list number. The list defines which
networks are to be permitted or denied.
1300-2699
Extended IP access list number. The list defines which
networks are to be permitted or denied.
access-list name
Name of a specific access list.
prefix-list-name
Name of a prefix list.