Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 373 / 931

Protocol Independent Features
Left running head:
Chapter name (automatic)
340
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
DISTANCE BGP
distance bgp < 1-255> < 1-255> < 1-255>
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command is used to configure distance for external, internal, and local routes.
P
ARAMETERS
D
EFAULT
V
ALUE
•
external-distance: 20
•
internal-distance: 200
•
local-distance: 200
E
XAMPLE
ALU(config-router bgp AS1)#distance bgp 15 50 10
Parameter Description
1-255
External Distance - Sets the administrative distance for
BGP external routes. External routes are those routes that
are those learned from a neighbor external to the
autonomous system. You can specify a value between 1 -
255. Routes with a distance of 255 are not installed in the
routing table.
1-255
Internal Distance - Defines the administrative distance for
BGP internal routes. Internal routes are those routes that
are learned from another BGP entity within the same
autonomous system. You can specify a value between 1 -
255. Routes with a distance of 255 are not installed in the
routing table.
1-255
Local Distance - Administrative distance for BGP local
routes. Local routes are those networks added using the
network command or those that are being redistributed
from another routing protocol. You can specify a value
between 1 - 255. Routes with a distance of 255 are not
installed in the routing table.