Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 457 / 931

Border Gateway Protocol
Left running head:
Chapter name (automatic)
424
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR EBGP
-
MULTIHOP
neighbor {< ip-address>|<peer-group-name> } ebgp-multihop [ <1-
255> ]
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command can be
used to accept and attempt BGP connections to external peers residing on
networks that are not directly connected.
P
ARAMETERS
D
EFAULT
Only directly connected external neighbors are allowed.
E
XAMPLE
ALU(config-router bgp AS30)# neighbor 1.1.1.1 ebgp-multihop
4
NEIGHBOR FILTER
-
LIST
neighbor {< ip-address>|<peer-group-name> } filter-list <1-199>
{ in|out }
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command uses AS-
PATH access list to filter the updates from a specified neighbor.
P
ARAMETERS
Parameter Description
ip-address
IP address of the BGP-speaking neighbor.
peer-group-name
Name of a BGP peer group.
1-255
The maximum hop count to reach neighbor.
Parameter Description
ip-address
Neighbor’s IP address.
peer-group-name
Name of a BGP peer group.
1-199
Number of an AS path access list. You can define this
access list with the ip as-path access-list command.
in
Access list to incoming routes.
out
Access list to outgoing routes.