Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 612 / 931

destination-nat static
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
579
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
DESTINATION
-
NAT STATIC
[ <1-65535> ] match [{ all | any }] < match-list name> destination-nat
pool <list-name> static
D
ESCRIPTION
This command is used to configure a static DNAT that uses one-to-one address
mapping without port translation.
P
ARAMETERS
D
EFAULT
V
ALUE
None.
E
XAMPLE
ALU(config-nat-N2)# match m1 destination-nat pool l1 static
Parameter Description
1-65535
The range for the NAT policy rule. This rule number signifies
the priority of a rule.
match
[{ all | any }]
< match-list
name>
This command forms a match-list of the Common
Classifiers that are pre-configured. In this type of match, the
relevant action is performed even if one rule in the list is
satisfied.
destination-nat
Type of NAT, here it is the DNAT.
list-name
The name of the list.
static
Use this keyword to configure static DNAT.