Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 479 / 931

Border Gateway Protocol
Left running head:
Chapter name (automatic)
446
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
SHOW IP BGP NEIGHBORS
show ip bgp neighbors < ip-address > [ advertised-routes | dampened-
routes | flap-statistics | paths [ <regular-expression> ]| received-
routes | routes ]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays information about the TCP and BGP neighbor connections.
P
ARAMETERS
E
XAMPLE
1
ALU# show ip bgp neighbors
BGP neighbor is 1.1.1.2, remote AS 100, external link
BGP version 4, remote router id 3.3.3.3
BGP state = Established, up for 00:12:08
Last read 00:00:07, Last sent 00:00:07
Hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received
Address family IPv4 Unicast: advertised and received
Received 342 messages, 0 notifications, 0 in queue
Sent 333 messages, 7 notifications, 0 in queue
Minimum time between advertisement runs is 30 seconds
For Address Family IPv4 Unicast
Route refresh request: received 0, sent 0
Number of Unicast prefixes received 5
Field Description
ip-address
IP address of the neighbor. If you omit this argument, all
neighbors are displayed.
advertised-
routes
Displays all the routes the router has advertised to a BGP
neighbor.
dampened-routes
Displays the dampened routes received from the neighbor.
flap-statistics
Displays flap-statistics of the routes learnt from the
neighbor.
path <regular-
expression>
Regular expression that is used to match the paths
received.
If regular-expression is not specified, displays all the paths
received from the neighbor.
received-routes
Displays all received routes (both accepted and rejected)
from the specified neighbor.
routes
Displays all routes that are received and accepted. This is a
subset of the output from the received-routes keyword.