Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 57 / 931

Using the Command Line Interface
Left running head:
Chapter name (automatic)
24
Beta Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
R
OUTER
C
ONFIGURATION
M
ODE
(RCM)
From the CM, you can enter the Router Configuration Mode (ACM). In this mode,
you can enter in to any specific application by entering the corresponding name,
such as OSPF, BGP, RIP, IP NAT, IP filter, firewall, etc.
Router configuration mode is used for configuring all the routing protocols.
E
XAMPLE
ALU(config)# router ospf 42
ALU(config-router ospf 42)#
E
XITING
C
ONFIGURATION
M
ODES
You can exit from the current configuration session by typing End , Ctrl-C, Ctrl-Z
and return to the UM/SUM mode. You can use the Exit command in any
configuration mode to return to the previous configuration mode.
If you use Ctrl-Z at the end of a command line in which a valid command is typed,
that command will be added to the running configuration file. In other words, using
Ctrl-Z is equivalent to hitting the Enter (Carriage Return) key before exiting.
Command (in CM) Description
router bgp < 1-65535>
Enters BGP router configuration mode.
router ospf < 1-65535>
Enters OSPF router configuration mode.
router rip
Enters RIP router configuration mode.
ip filter <name>
Enters Filter configuration mode.
ip nat <name>
Enters NAT configuration mode.
Command (in CM) Description
end
or
^Z
^C
Ends the current configuration session (from any
configuration mode) and returns to SUM.
exit
Exits the current configuration mode and returns to the
preceding mode. For example, you can enter this
command to exit from CM to SUM or from ICM to CM.
top
This command enables you to go one step above from the
mode you are currently in. For Example, if this command is
entered in the ICM, control moves to the CM.