Alcatel-Lucent OmniAccess 700 CLI, Справочник по командам, Страница: 378 / 931

ip access-list standard
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
345
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
IP ACCESS
-
LIST STANDARD
ip access-list standard {< 1-99 >|< 1300-1999 >| <access-list-name> }
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to define a
named access list, and enters Standard Access-list Configuration mode.
P
ARAMETERS
D
EFAULT
V
ALUE
None.
E
XAMPLE
ALU(config)# ip access-list standard test
ALU(config-std-nacl)#
Configure Standard IP Access-list Rule
This command is used to configure a rule for a Standard IP Access-List. You can
configure multiple rules for an IP access list.
{ permit | deny } { any | host < host-ip-address >| <ip-address/
prefix-length> |< ip-address subnet-mask >}[ log ]
Example:
ALU(config-std-nacl)# permit host 10.0.0.1
ALU(config-std-nacl)# permit 11.0.0.0/8
Parameter Description
< 1-99 >|< 1300-
1999 >
IP access list number.
access-list-name
Name of the access list.
Parameter Description
permit
Result is permit if conditions are matched.
deny
Result is deny if conditions are matched.
host < host-ip-
address>
Specify host IP address.
<ip-address/prefix-
length> |< ip-address
subnet-mask >
Source IP address network.
log
If access list is matched, log the message.