akkuteam CHARGE CUBE 12-40 Скачать руководство пользователя страница 56

Страница: 56 / 58

Warranty

Service

The battery charger from akkuteam comes with a product warranty of 24 months against

materials or manufacturing defects.

The product warranty begins on the shipping date as confirmed on the invoice or the

shipping ticket.

The product warranty is valid for the user/buyer, provided the battery charger was purchased

from an authorized dealer and that it was used as intended.

The product warranty is null and void if the battery charger was used for other purposes that

are in violation of the intended uses.

The warranty expires when the battery charger was not used in accordance with the

operating manual.

In case of a defect, akkuteam will at its own discretion repair or replace only the defective

components.

Service Address:

akkuteam Energietechnik GmbH

Theodor-Heuss-Straße 4

D-37412 Herzberg am Harz

[email protected]

In the case of a device defect the maintenance are offered by akkuteam Energietechnik.

Please contact us by indicating the device type and serial number:

[email protected]

Shipping Address:

akkuteam Energietechnik GmbH

Theodor-Heuss-Straße 4

D-37412 Herzberg am Harz

You can also order spare parts in our online shop.

www.shop.akkuteam.de/VAS-Zubehoer

Содержание CHARGE CUBE 12-40



























































Результаты поиска

Содержание CHARGE CUBE 12-40

Отзывы:

akkuteam CHARGE CUBE 12-40, Руководство по эксплуатации, Страница: 56 / 58

Результаты поиска

Содержание CHARGE CUBE 12-40

Отзывы: