akkuteam CHARGE CUBE 12-40, Руководство по эксплуатации, Страница: 41 / 58

41
EN
General
information
The device settings allow the following personalisation possibilities:
– language selection for display presentation
– configuration of cable lengths (0.1 m – 20 m)
– configuration of cable cross-section (4mm², 6mm², 10mm², 16mm²)
– information on the device's current firmware version
– switch beeper on and off
– switch showroom mode on and off
– switch standby operation continuously on and off
POWER SUPPLY
SETTINGS
I-CHECK
CONFIRM EXIT
Select the "SETTINGS" operating
mode using the arrow keys and
confirm your selection with
"CONFIRM".
Settings areas
LANGUAGE
CHARGE CABLE
SETTINGS
CONFIRM EXIT
FIRMWARE VERSION
BEEPER
SETTINGS
CONFIRM EXIT
SHOWROOM MODE
HOLD DIAGNOS. MODE
SETTINGS
CONFIRM EXIT
Settings areas
– language
– charging cable version
– firmware version
– acoustic signal
– showroom mode
– continuous standby operation
Select the settings area using the
arrow keys and confirm your
selection with "CONFIRM".
Device settings