akkuteam CHARGE CUBE 12-40, Руководство по эксплуатации, Страница: 26 / 58

26
10. Cancelling the charging process
Press the STOP key during the
charging process. The charging
process will be cancelled.
11. Continuing the charging process
14.8 V
22.3 A
STOP
START EXIT
OUT OF
VEHICLE
12.4 V
46 Ah CHARGE
0 Ah
CHARGED
TERMINAL VOLTAGE
OF BATTERY
WET
CONFIRM
The charging process can be
continued by pressing the left-hand
“START” selection key.
The current battery open-circuit
voltage will again be displayed for 30
seconds. The charging process starts
automatically after this.
12. Charging process complete
13.8 V
46 Ah
44 Ah
CHARGED
0.8 A
FLOAT
CHARGE
FULLY CHARGED
CHARGE WET
Once the charging process has
stopped the charge retention
process starts automatically with
13.8 V. In this condition, the 4
charging bars all blink and " FLOAT
CHARGE" is displayed.
Press the STOP key. Disconnect
the black charging clamp from the
negative terminal (-) and the red
charging clamp from the positive
terminal (+) on the battery.
Danger of spark formation on premature removal of the
charging cable. Press the STOP key to stop the charging
process before disconnecting the charging cable.
Damage hazard to connecting sockets and connecting
plugs. Do not unplug or disconnect the charging cables
during charging.