akkuteam CHARGE CUBE 12-40, Руководство по эксплуатации, Страница: 25 / 58

25
EN
0.0 V
0.0 A
CHARGE MODE
START POWER
POLARITY
CHECKED
OUT OF
VEHICLE
Then confirm the polarity check
by pressing the "START POWER"
key. The charger is now ready for
operation.
9. Starting the charging process
14.8 V
46 Ah
35 Ah
CHARGED
22.3 A
OUT OF
VEHICLE
READY IN 45 m
CHARGE WET
14.8 V
46 Ah
IN VEHICLE CHARGING
35 Ah
CHARGED
22.3 A
CHARGE WET
IN VEHICLE
The following text describes
charging a wet-cell battery at 46
Ah outside the vehicle. The current
voltage and current are displayed
and updated every 0.5 seconds.
Rising bars symbolise the battery's
charging status (e.g. if 2 bars
are displayed and the 3rd bar is
blinking this symbolises a charging
status of 75%). The charged capacity
is displayed underneath the battery
symbol. The remaining charging
time is shown in minutes between
120 and 0. If this period is longer
than 120 minutes, the display shows
"READY IN > 2h".
If the battery is connected to a
vehicle, the remaining charging
time is not displayed. Instead, " IN
VEHICLE CHARGING" is displayed
together with a car symbol.
Material damage hazard if charging cable has incorrect
polarity. Always observe the charging cable polarity at
the battery.