akkuteam CHARGE CUBE 12-40, Руководство по эксплуатации, Страница: 10 / 58

10
EMC device
classifications
Devices in Emission Class A:
– are only intended for use in industrial environments
– can cause grid-bound and radiated malfunctions in other
areas.
Devices in Emission Class B:
– fulfil the emission requirements for residential and industrial
environments. This also applies to residential areas in which
the energy supplies are provided by the public low voltage
grid.
EMC device classification in accordance with rating plate or
technical data.
EMC
measures
In special cases, impairments to the intended application area
can occur despite observance of the standardised emission
limit values (for example if sensitive devices are located at the
installation location or if the insulation location is in the vicinity
of radio or television receivers). In this case, the owner is obliged
to take reasonable measures to ensure fault elimination.
Data backup The user is responsible for data backup for changes made in
relation with the work settings. The manufacturer is not
responsible for deleted personal settings.
Service and
maintenance
The device only requires minimum care and maintenance
under normal operating conditions. However, observance of
some points is essential in order to keep the device serviceable
over many years.
– Check the mains plug and mains cable in addition to charging
cables and charging terminals for damage before every
start-up.
– If the device housing surface is dirty, clean it using a soft
cloth and only using solvent-free cleansing agents.