akkuteam CHARGE CUBE 12-40, Руководство по эксплуатации, Страница: 14 / 58

14
Safety
Proper use The charger is used for charging the batteries listed below. Any other
or further usage is considered improper. The manufacturer is not liable
for any damages resulting from the above. Proper intended use also
includes
– observing all the information contained in this operating manual
– regular checking of the mains and charging cables
Charging of the following batteries is permitted:
– wet-cell batteries: enclosed batteries with liquid electrolyte (can be
recognised by the sealing plugs) and low-maintenance / maintenance-
free wet-cell batteries (MF)
– AGM batteries: enclosed batteries (VRLA) with specified electrolyte
(nonwoven fabric)
– Gel batteries: enclosed batteries(VRLA) with specified electrolyte
(gel)
– EFB batteries: enclosed batteries with liquid electrolyte and
increased cycle stability for start-stop operation
– Li-Ion batteries with integrated BMS (Battery Management System)
Power connection
You will find the rating plate, which states the permissible mains
voltage, attached on casing. The device is only designed for this mains
voltage. You can find details about the necessary mains cable fusing in
the chapter entitled "Technical data". If your device is not fitted with a
mains cable or mains plug, you should fit a mains cable and mains plug
in accordance with your national standards.
NOTE! Electrical installations which are not sufficiently
dimensioned can result in serious material damages. The
mains cable and its fusing is to be designed to match the
existing power supply. All technical data on the rating plate
applies.
Initial start-up
Incorrect operation can result in serious personal or
material damages. Only implement the described
functions once you have completely read and understood
the following documents:
The charging of dry batteries (primary elements) and
non-rechargeable batteries can cause serious personal
and material damages and is therefore forbidden.