66
Chapter 6: Mixer Function
(Mixer Mode)
■
S1 ROUTE – S4 ROUTE (Send 1–4 routing)
You can select how the signals of each channel are sent to AUX send 1–4 or the internal effects (FX 1–4).
Range: PRE/POST/INSERT
The parameter settings are as follows:
•
PRE
(pre-fader)
Signals are routed to AUX send 1–4 (or FX 1–4) before they pass the faders (LEVEL parameter). Since the
fader settings do not affect this signal routing and level, this setting is useful when you need only the effect
signals (such as chorus and reverb).
EQ
MASTER
L
MASTER
R
AUX
LEVEL
PAN
SEND
•
POST
(post-fader)
Signals are routed to AUX send 1–4 (or FX 1–4) after they pass the faders (LEVEL parameter). With this
setting, the fader setting and the send level are interlocked.
EQ
MASTER
L
MASTER
R
AUX
LEVEL
PAN
SEND
•
INSERT
(insert)
This setting enables you to insert the internal effects (FX 1–4) after the EQ. This setting is useful when you
wish to apply an effect (such as compressor which processes the original sound directly) to particular input
signals or tracks.
FX
EQ
MASTER
L
MASTER
R
LEVEL
PAN
➸
NOTE :
You can insert an effect into only one channel for each send. If you specify any one of the
channels to insert an effect, you will not be able to use the send function on other channels. For example,
if you select INSERT for INPUT MIX channel 1 with Send 1, Send 1 will be used only for INPUT MIX
channel 1, and cannot be used by other channels.
