manualshive.com logo in svg

Akai DPS 16, Руководство оператора

Поделиться
Скачать
Akai DPS 16 Скачать руководство пользователя страница 120

108

Chapter 9: Various Settings 

(Q-Link Functions, Setup Mode)

Time

You can set the offset time and the time value for the 

[TO]

 key and 

[FROM]

 key.

6

8

7

9
J

6

Absolute time

This display only field indicates the current position of the DPS16 in absolute time (hour, minute, second,
frame, sub-frame) or by bar, beat, clock.

7

Offset time

This time field allows you to set an offset time from the absolute time either by the time indication (hour,
minute, second, frame, sub-frame) or by the bar indication (bar, beat, clock). Move the cursor to this field and
use the 

[JOG]

 wheel or the 

[NUMBER/NAME]

 key to set the value. This field is interlocked with the 

Relative

time

 field (

8

). If you change the value in this field, the value of the 

Relative time

 field will change.

8

Relative time

This display indicates the current position of the DPS16 by relative time (hour, minute, second, frame, sub-
frame) or by bar, beat, clock. A 

Relative time

 value is obtained by subtracting an 

Offset

 value from the

Absolute time

. Move the cursor to this field, and use the 

[JOG]

 wheel or the 

[NUMBER/NAME]

 key to change

the value. (Along with the change, the Offset value will change accordingly.)

✐

TIP : 

Pressing the 

[F2]

 key (counter reset) in the Time Display function (one of the Q-Link functions) will

reset the 

Relative time

 field value to zero and automatically change the value of the 

Offset time 

field

accordingly.

9

TO time

This numeric field enables you to set the number of seconds to back up from the current position to start
playback when you press the 

[TO]

 key. Move the cursor to this field, and turn the 

[JOG]

 wheel to set a value

between one and ten seconds.

J

FROM time

This numeric field enables you to set how many seconds to play from the current position when you press the

[FROM]

 key. Move the cursor to this field, and turn the 

[JOG]

 wheel to set a value between one and ten

seconds.

Содержание DPS 16







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды