Akai DPS 16 страница 131 Скачать руководство пользователя

Страница: 131 / 198

119

Chapter 10: Project Management (Project Mode)

4. Move the cursor to the

Device

field (

) and set to “

SCSI

”.

5. Move the cursor to the

Destination Disk

field (

) and select the ID number of the backup SCSI

device.

6. Move the cursor to the

Disk Operation

field (

) and specify whether to format the backup SCSI

device (

FULL FORMAT

), erase the data on the device (

FAST

ERASE

), or add backup data (

APPEND

• If the backup disk has not been formatted, select “

FULL FORMAT

”. (For more information on the format and

erase operation, see page 127.)

• You can select “

APPEND

” for a SCSI device that already has backup data via the

FULL FORMAT

FAST

ERASE

command.

7. If you have selected the ID number of the CD-R/CD-RW drive in step 5, perform the following

operations, as necessary.

When you press the

[F5]

(

DO IT

) key, the following window appears.

1
2

(x2)

• In the

Write speed

field (

), select the writing speed.

The selectable options are

MAX

SLOW (x1)

FAST x2

, and

. When

MAX

is selected, the

fastest speed of the connected drive available within the range of x1 to x8 is used.

• If you wish to perform test write before the writing operation, set the

Test write

field (

) to

(See

page 115).

8. Press the [F5] (

DO IT

) key.

• If you have selected “

APPEND

” in step 6, the backup operation starts when you press the

[F5]

(

DO IT

) key.

• If you have selected “

FULL FORMAT

” or “

FAST

ERASE

” in step 6, the screen displays the backup device

information (ID, product name, manufacturer name, and version number), and the confirmation for erasing the
contents.

CAUTION :

If you execute the operation, all data on the backup disk will be erased. Proceed very carefully

so that important data is not lost.

9. Press the [F6] (

DO IT

) key to execute the backup operation.

The format/erase operation starts on the backup disk. When it is completed, the backup operation starts.

When the backup operation is completed, the display returns to the Project screen.

To cancel the operation, press the

[F1]

(

CANCEL

) key.

Содержание DPS 16







































































































































































































Результаты поиска

Содержание DPS 16

Отзывы:

Похожие инструкции для DPS 16

Бренды по названию

Популярные бренды

Akai DPS 16, Руководство оператора

Результаты поиска

Содержание DPS 16

Отзывы:

Похожие инструкции для DPS 16

Бренды по названию

Популярные бренды