Ahlborn ALMEMO 470, Инструкция по эксплуатации

Страница: 88 / 108

- 88
–
11 Questions and Answers
11.1 General Questions
Question Possible causes Possible solution
The wireless
sensor does not
connect to the
data logger Overloaded radio
channel Select another radio channel for the
wireless network of the data logger (see
chapter 8.1.2 How to set a Radio
Channel)
Wireless sensor is
outside the range
of the wireless
network Operate the wireless sensor closer to the
data logger, mind radio barriers such as
walls and metal cabinets.
Wireless sensor
has saved the
wrong pairing
data. Simultaneously press the ON/OFF
button and the F button for 3 seconds.
The red and the blue LED are flashing
simultaneously and the pairing data will
be deleted.
Pair the wireless sensor with the data
logger (see chapter 7.1.7 How to
connect the Wireless Sensor with the
Data Logger).
After having been
switched off and
then on again, the
wireless sensor
does not
automatically
connect to the
data logger. The pairing data
has been deleted
from the wireless
sensor or from the
data logger. Once again switch the wireless sensor
and the data logger off and then on
again.
In case the connection is still not
automatically established:
Simultaneously press the ON/OFF
button and the F button for 3 seconds.
The red and the blue LED are flashing
simultaneously and the pairing data will
be deleted.
Pair the wireless sensor with the data
logger (see chapter 7.1.7 How to
connect the Wireless Sensor with the
Data Logger).
Wireless sensor is
outside the range
of the wireless
network Operate the wireless sensor closer to the
data logger, mind radio barriers such as
walls and metal cabinets.