7 Usage
- 26
–
neither light up nor flash.
In case the green and the blue LED flash simultaneously after the
wireless sensor has been switched on, the wireless sensor was
already paired with a data logger and pairing data is saved on the
wireless sensor. If the wireless sensor was delivered together with a
data logger, usually the two of them have already been paired.
If you want to connect the wireless sensor with the same data logger
featuring the same settings you had previously, please follow the
instruction in section Reconnect sensor and data logger.
If you want to connect the wireless sensor with another data logger or
with other wireless settings, please follow the instructions in chapter
7.1.8 How to terminate the Connection between Wireless Sensor and
Data Logger, section Delete pairing data from a wireless sensor
without connection) and afterwards the steps indicated in the present
section Pair the wireless sensor with the data logger.
!
The data logger needs to be switched on.
1. In the home screen, tap on Settings
.
2. Tap on
Wireless network.
3. Tap on
Sensor pairing.
4. Tap on the field next to
Pairing key.
5. Enter the serial number of the ALMEMO
®
wireless sensor. You will find the serial
number on the nameplate on the rear side
of the ALMEMO
®
wireless sensor.
6. Tap on
OK.
➢
The serial number of the ALMEMO
®
wireless sensor will be saved to
the data logger.
➢
The serial number of the ALMEMO
®
wireless sensor will be displayed
next to the field
Pairing key.
7. Press and hold the
F
button
15
of the ALMEMO
®
wireless sensor.
➢
All LEDs of the ALMEMO
®
wireless sensor are flashing
simultaneously. The wireless sensor previously had no pairing data
