11 Questions and Answers
- 89
–
Overloaded radio
channel
Select another radio channel for the
wireless network of the data logger (see
chapter 8.1.2 How to set a Radio
Channel)
The wireless
sensor connects
with the wrong
data logger.
Serial number of
the wireless
sensor has been
entered in several
data loggers.
Delete the pairing data from the data
logger, to which you do not want to
connect the wireless sensor (see chapter
7.1.8 How to terminate the Connection
between Wireless Sensor and Data
Logger) and on the same data logger
delete the serial number of the wireless
sensor from the field pairing key in the
menu Settings>Wireless
network>Sensor pairing.
The data transfer
between data
logger and
wireless sensor is
delayed.
Overloaded radio
channel
Select another radio channel for the
wireless network of the data logger (see
chapter 8.1.2 How to set a Radio
Channel)
Two data loggers
with the same
wireless network
SSID
Select different wireless network SSID
for each data logger (see chapter 8.1.4
How to set a Wireless Network SSID).
Operating mode
…with network
monitoring is set.
Set the operating mode Measure (see
chapter 8.1.6 How to set the Operating
Mode).
The wireless
sensor cannot be
switched on.
The batteries of
the wireless
sensor are empty.
Connect the power supply (see chapter
7.1.1 How to connect the Power Supply)
and wait some time before trying to
switch on the sensor again.
After the
connection has
been established
the LEDs of the
wireless sensor go
out.
The sleep mode
of the wireless
sensor is enabled.
If required, disable the sleep mode of the
wireless sensor (see chapter 8.2.6 How
to enable / disable sleep mode).
The measuring
channels of a
wireless sensor
are not being
displayed.
No measuring
channels are
enabled.
Enable one or several measuring
channels (see chapter 8.3.1 How to
enable and disable a Measuring
Channel).
