Ahlborn ALMEMO 470 Скачать руководство пользователя страница 74

Страница: 74 / 108

8 Settings

- 74

–

5. Tap on

Power saving.

The sleep mode will not be activated until the wireless sensor is being

paired again.

To extend the battery life, for wireless ALMEMO

interfaces the sensor

supply is being automated during sleep mode.

6. In case you want to run a wireless ALMEMO

interface with an

ALMEMO

sensor that shall permanently be powered via sensor

supply in sleep mode:

Tap on the button next to

Sensor supply permanently

, until the

button lights green and features the word ON. The ALMEMO

sensor

will then be permanently powered via sensor supply.

7. In case you use the recommended automated sensor supply (sensor

supply permanently OFF) and you want to use a wireless ALMEMO

interface with an ALMEMO

sensor that requires a settling time before

querying a measured value:

Tap on the field next to

Settling time

, enter the desired settling time in

seconds, and tap on

OK.

➢

Before querying a measured value, the sensor will be powered via

sensor supply for as long as its settling time may be.

8. Keep tapping on the button

Back

, until the data logger displays the

home screen.

9. In the home screen, tap on Settings

10. Tap on

Wireless network.

11. Tap on

Sensor pairing.

12. In the line

Unpair sensors

tap on the field

Select sensor.

13. Tap on the sensor you want to unpair to enable the sleep mode.

➢

The sensor will be unpaired. It will no longer be listed in the table. The

blue LED of the wireless sensor is no longer on. The pairing data has
been deleted in the data logger as well as in the wireless sensor.

Содержание ALMEMO 470













































































































Результаты поиска

Содержание ALMEMO 470

Отзывы:

Похожие инструкции для ALMEMO 470

Бренды по названию

Популярные бренды

Ahlborn ALMEMO 470, Инструкция по эксплуатации

Результаты поиска

Содержание ALMEMO 470

Отзывы:

Похожие инструкции для ALMEMO 470

Бренды по названию

Популярные бренды