7 Usage
- 42
–
7.4 How to manage Measurements
7.4.1 How to export measurements from the data logger
to a PC
!
The data logger must either be connected to the PC via a USB
connection or via an Ethernet network (see chapter 7.5 How to
connect the Data Logger to a PC).
→
Connect the data logger with the ALMEMO
®
Control software (see
chapter 7.5.4 How to use ALMEMO
®
Control).
1. Click on
Search attached devices.
Or
1. In the menu
Device list
click on
Refresh list.
2. In the menu
Device list
on the tab
Edit
, click on
Data memory
…
3. In the line
Measured value memory device
, enable the radio button.
4. Click on the button
Refresh list.
➢
The table will display the measurements stored in the measured value
memory of the data logger including the measurement name, start
time, end time, and size in Mb.
5. In the table click on the line, in which the measurement you want to
export is displayed.
You can select several measurements at once to save them as
individual files in the same file folder on your PC. To do so, click on
the relevant lines while holding down the Ctrl key so that the desired
measurements are selected.
6. If you only want to export measurement data of a designated time
interval, tick the checkbox
Select time segment
, and enter a start
time as well as an end time in the fields Start date, Start time, End
date, End time.
If you want to choose a time interval that applies to several
measurements, all relevant measurements must be selected. For
each measurement, a file will be stored that contains only the section
