8 Settings
- 61
–
8.1.4 How to set a Wireless Network SSID
!
No wireless sensor must be connected to the data logger.
If you want to operate several data loggers in parallel, make sure to
set a different wireless network SSID for each data logger.
1. In the home screen, tap on Settings
.
2. Tap on
Wireless network.
3. Tap on the field next to
Wireless network SSID.
4. Tap on the desired wireless network SSID.
➢
The wireless network created by the data logger will obtain the desired
SSID.
8.1.5 How to set the Transmission Power
!
No measurement may be started.
1. In the home screen, tap on Settings
.
2. Tap on
Wireless network.
3. Tap on the field next to
Radio transmit power.
4. Tap on the desired radio transmit power.
Selection
Transmission power
in dBm
Transmission power in
mW
Low
0 dBm
1 mW
Medium
10 dBm
10 mW
Maximum
17 dBm
100mW
➢
The data logger will transmit data at the selected transmission power.
8.1.6 How to set the Operating Mode
There are three different operating modes available for the data
logger. The selected operating mode determines what kind of data is
being transferred between the data logger and the wireless sensor.
Operating mode Measure
This operating mode is recommended if many wireless sensors
