Ahlborn ALMEMO 470 Скачать руководство пользователя страница 92

Страница: 92 / 108

11 Questions and Answers

- 92

–

11.2 How to reset the Data Logger Settings

If you follow the following steps, all settings made so far will be
deleted.

After the reset, the saved measurements will no longer contain start
and stop times (i.e. no timestamps will be available).

With the reset taking effect, the time and date in the data logger will be
set to 00:00 (time) and 00.00.2000 (date).

Before resetting the data logger, export the saved measurements to

keep the start and stop times.

The pairing data of the connected wireless sensors will not be deleted.

The data logger must be switched off.

1. Press and hold the Hotkey

, while pressing the ON/OFF key

. Press

and hold those keys until the home screen will be displayed.

➢

All settings made so far will be deleted.

➢

The data logger is switched on.

2. Set the time and date of the data logger before starting a new

measurement (see chapter 8.1.7 How to set Time, Date and Time
Zone).

Содержание ALMEMO 470













































































































Результаты поиска

Содержание ALMEMO 470

Отзывы:

Похожие инструкции для ALMEMO 470

Бренды по названию

Популярные бренды

Ahlborn ALMEMO 470, Инструкция по эксплуатации

Результаты поиска

Содержание ALMEMO 470

Отзывы:

Похожие инструкции для ALMEMO 470

Бренды по названию

Популярные бренды