Agrio ALKA 2500, Инструкция по эксплуатации

Страница: 12 / 104

www.agrio.cz
info@agrio.cz 12
- Repairs to the wheels and tires may be provided only by qualified personnel and with the
designated tools!
- Check the wheel nuts and bolts! Failure to comply can result in the loss of a wheel and the
machine may tip over!
- After the first 50 km, tighten and regularly test the tightness of the bolts.
- Check the pressure regularly! The pressure must correspond to the actual load capacity and
wheel loads!
- Regularly check the tires for damage (cuts, punctures, bulges)!
- A table with pressure for different speeds is indicated on the tire.
4.2.6 Repair and maintenance
- Check the nuts and bolts regularly to ensure that they are securely tightened, and tighten them if
necessary!
- Properly dispose of oils, greases and filters!
- Before working on electrical equipment, disconnect the power!
- Safety equipment that wears out must be inspected regularly and replaced timely!
- When performing welding work on the sprayer, disconnect the power supply!
- Do not open lines that are under pressure! Release the pressure first using the nozzles!
- Replacement hoses used for pesticides may only be hoses with a working pressure of min. 20
bars that meet the necessary mechanical, chemical and thermal resistance! Only stainless steel
bands may be used for assembly!
- Repairs to the tank may be carried out only after completely washing the inside of the tank and
using a breathing mask or oxygen mask! For safety reasons, another person must remain outside
the tank for supervision during repairs!
- When repairing sprayers that apply liquid fertilizers with nitrates and urea, pay particular
attention to the following:
-
When the water evaporates, the residues of dissolved nitrate and urea convert into salts, forming
pure nitrates and urea.
- If the critical temperature is exceeded during repair (e.g. grinding, welding), nitrate in its pure
form, when combined with organic materials (e.g. urea) is explosive!
- Nitrate salts and urea are water soluble, which means that before making repairs, wash
thoroughly with water to eliminate the danger of explosion.
Attention!
Repairs to the sprayers may only be performed by qualified personnel!
4.2.7 Handling pesticides
- Follow the recommendations of the chemical manufacturer!
- Wear protective clothing and observe the regulations on use and cleaning!
- Substances which tend to stick together or coagulate must not be applied!
- When working with pesticides, it is forbidden to eat, drink or smoke!
- Limit children's access to the sprayers and preparations!
- Never attempt to blow through the nozzles and other small parts with your mouth!
Attention!
Prior to the application of fertilizers and preparations, carefully read the safety data sheet and
carefully observe the operating instructions.