Agilent Technologies 8935 Series, Руководство пользователя

Страница: 65 / 343

64 Chapter 3
Troubleshooting
Functional Diagnostics (Step 2)
Configuring a Printer
Only perform the following steps if you want to print test results to a
printer.
1. If you are not already at the SOFTWARE MENU screen, press the
Menu
key.
2. Under
SET UP TEST SET:
, select
Print
to access the “TESTS
(Printer Setup)” screen.
3. Under
PRINT SETUP:
, select
Model:
and the printer of your choice.
4. Set the
Printer Port:
for the side-panel connector your printer is
connected to (Parallel 15, Serial 9, or GPIB).
If an GPIB printer is used, you need to enter the printer’s two-digit
bus address when the
Printer Adrs
field appears (Example; enter 1
or
01
for bus address 701). Also, press the
Shift
key, then the
INST
CONFIG
key to access the I\O CONFIGURE screen, and set the
Mode
field to
Control
.
5. Under
PAGE CONTROL:
, set the
Lines/Page:
and Form Feed (
FF at
Start:
, and
FF at End:
) parameters if necessary.