Aegis OSC-9200, Руководство пользователя

Страница: 3 / 204

II
Safe Operation
The product can only be operated under the safe conditions and positions specified by the manufacturer. Do not
obstruct the ventilation of the oscilloscope during use. Failure to comply with the manufacturer's specifications
may result in electric shock, fire, serious personal injury, or even death. Applicable local safety regulations and
accident prevention rules must be observed in all applications.
Do not use the oscilloscope outdoors on AC power.
Do not place the oscilloscope on unstable or unlevel surfaces.
Do not use the oscilloscope in or near a heat source, and the ambient temperature cannot exceed the maximum
temperature in the document or datasheet
Electrical Safety
If you ignore the electrical safety precautions, electric shock, fire and/or serious personal injury or death may occur.
Only use the power adapter and battery specified by the manufacturer to power the oscilloscope. The power
adapter can only work within its rated input voltage range.
Only a probe specified by the manufacturer can be used for testing. The use of other probes for may result in
electric shock.
Damage to the insulating protective layers of the oscilloscope and accessories may cause electric shock. If an
extension cord or terminal block is used for the power supply, it must be checked regularly to ensure safety.
Before use, check whether the power cord or probe is damaged. If the power cord or probe is damaged, do not
use.
Do not insert the AC plug of the power adapter into a dusty or dirty socket. Be sure that the plug is firmly
inserted into the socket to avoid fire and/or injury due to sparks.
Do not overload any sockets, extension cords or connectors to avoid risk of fire or electric shock.
When the measured voltage Vrms exceeds 30V, take appropriate precautions to avoid any danger.
Unless expressly permitted, do not remove the cover or any part of the casing while the oscilloscope is in
operation. Doing so would expose circuits and components, reduce the overvoltage level of the measurement,
and may cause personal injury, fire, or damage to the oscilloscope.
Anything that is not designed to be placed on the external interface of this product should not be placed there.
Doing so may cause an internal short circuit and/or electric shock, fire, or injury to the oscilloscope.
Use or placement of the oscilloscope in an environment exceeding IP51 may damage the oscilloscope. This
oscilloscope must be used in a dry environment to avoid risk of electric shock.
Similarly, the oscilloscope should not be used when condensation has formed or may form inside or on the
surface. For example, when the oscilloscope moves from a cold environment to a warm environment, the
penetration of water increases the risk of electric shock and damage to the scope.