Aegis OSC-9200, Руководство пользователя

Страница: 159 / 204

144
Note : if you need to delete a setup file in the memory, please save a new
setup to the same location with the same name to overwrite it.
Internal Save and Recall
Ø
Save the specified oscilloscope setting to internal memory.
1. Connect the signal to the oscilloscope and obtain stable display.
2. Press Shift and Cursors on the front panel to enter the SAVE/RECALL function menu.
3. Press the Save F key to enter the SAVE function menu.
4. Press the Type F key, turn the Universal Knob to select Setups ; and then press the knob to
confirm.
5. Press the Press to Save F key to enter the disk manager, enter the “local” directory, and press
the Press to Save F key to save the current setup.
Ø
Load the specified type of file from internal memory.
If want to recall the setup after having finished the steps above, please do the following steps:
1.
Press the Recall F key enter the RECALLING function menu.
2. Press the Type F key and then turn the Universal Knob to select Setups; and then press the
knob to confirm.
3. Press the Press to Recall F key to enter the disk manager, recall the current setup form the
appointed location. After a few seconds, you will get the popup message, “ Recalled file
successfully! ”
External save and recall
Before using external storage and recall, make sure that a USB flash drive is connected correctly.
External storage can be used to save all of the filetypes above
, but images and CSV files cannot be
recalled.
Ø
Save the specified type of file to the external USB flash device.
1.
Press the Shift and Cursor button on the front panel to enter the SAVE/RECALL function
menu.
2. Press the Save F key to enter the SAVE menu.
3. Press the Type F key to select Setups and then press the knob to confirm.
4. Press the Press to Save F key to enter the disk manager.