Advantech EKI-9312P Series, Руководство пользователя

Страница: 114 / 286

M
ANAGEMENT
I
NTERFACE
Server Configuration
The Server Configuration page allows users to configure settings for servers.
To access this page, click Management > > Server Configuration .
Figure 3-62. Management > > Server Configuration
The following table describes the items in the previous menu.
Table 3-60. Management > > Server Configuration
Parameter Description
Server Click the drop-down menu to select the server for which data is to be
displayed or configured. If the add item is selected, a new TACACS server can be
configured.
Server Address Enter the Server IP address or Hostname. Hostnames are composed of
series of labels concatenated with dots. Each label must be between 1 and 63
characters long, and the entire hostname has a maximum of 255 characters.
Priority Enter the order in which the servers are used. Default value is 0. It
should be within the range 0-65535.
Port Enter the authentication port. Default value is 49. It should be within the range 0-
65535.
Key String Enter the authentication and encryption key for communications
between the device and the server. The valid range is 0-128 characters.
Default is blank. The key must match the encryption used on the server.
Apply Click Apply to submit the key in the Key String field. If the checkbox is not checked,
you will not be able to enter the key. By default its unchecked.
Connection Timeout Enter the time to allot the amount of time that passes before the connection
between the device and the server time out. The range is 1 to 30.
Default value is 5. Enter 0 to set it to default value.
Submit
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Remove
Click Remove to delete the selected server from the configuration.
102