Advantech EKI-9312P Series, Руководство пользователя

Страница: 113 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-58. Management > LLDP > LLDP-MED > Remote Device Information (Continued)
Parameter Description
Extended PoE PD Displays extended PD TLV is received in LLDP frame on this port.
 Required - Specifies the remote port's PD power requirement.

Source - Specifies the remote port's PD power source.
 Priority - Specifies the remote port's PD power priority.
Refresh Refresh the data on the screen with the present state of the data in the switch.
3.3.16
Configuration
The Configuration page allows users to configure key string and connection timeout settings
for . To access this page, click Management > > Configuration .
Figure 3-61. Management > > Configuration
The following table describes the items in the previous menu.
Table 3-59. Management > > Configuration
Parameter Description
Key String Enter the authentication and encryption key for communications
between the device and the server. The valid range is 0-128 characters.
The key must match the key configured on the server.
Apply
Click Apply to enter the key in the Key String field. If the checkbox is not checked,
you will not be able to enter the key. By default its unchecked.
Connection Timeout Enter the maximum number of seconds allowed to establish a TCP connection
between the device and the server. The default value is 5 seconds. The
valid range is 1 to 30.
Submit Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
101