Advantech EKI-9312P Series, Руководство пользователя

Страница: 62 / 286

M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-10. Management > Local Password Management > User Accounts
Parameter Description
User Click the drop-down menu to configure an existing account or to create a new one.
Up to support five "Read-Only" accounts.
User Name Displays the account name or enter a name for new account. Up to 32 alphanu-
meric characters (not case sensitive) and also the dash ('-') and underscore ('_')
are available. Default is not valid for account name.
Password Enter a new password or change password (between 8 to 64 characters) for the
account. It only shows asterisks (*) or dots (.) based on the web browser.
The special character as following are available (except " and ?).
~ ` ! @ # $ % ^ & * ( ) _ - + = [ ] { } \ | : ; ' < > . , /
Confirm Password Enter the password to verify. It only shows asterisks (*) or dots(.) based on the web
browser.
Access Level Click the drop-down menu to select the user access level. The lowest access level
is “Read-Only”, and “Read-Write” is the highest. Only the user has “Read-Write”
level can suspend a user's access.
Lockout Status Displays the user account is locked due to excessive login attempts.
Password Override- Click the drop-down menu to enable or disable override complexity check. The
Complexity Check default is Disable.
Password Expiration Displays the expiration date of the password.
Date
SNMP v3 User Configuration
SNMP v3 Access Displays the SNMP v3 access privileges. Only the admin account has "Read-
Mode Write" access, and other accounts have "Read-Only" access.
Authentication Proto- Click the drop-down menu to select a SNMP v3 authentication protocol for the
col selected user account. Specify a password (8 characters) for authentication proto-
col is MD5 or SHA.
Configure Encryption Check the checkbox to allow modifying encryption protocol and encryption key.
Encryption Protocol Click the drop-down menu to select a SNMP v3 encryption protocol. Select None
and ignore the Encryption Key.
Encryption Key Enter a key (between 8 to 64 characters) to be a SNMP v3 encryption key.
Add Click Add to create a new user account.
Submit Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Delete
Click Delete to delete a selected user account. To save the values across a power
cycle perform a system save. "Read-Write" user accounts are not deletable.
50