Advantech EKI-9312P Series, Руководство пользователя

Страница: 213 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-150. Security > Port Access Control > Port Configuration (Continued)
Parameter Description
Transmit Period Enter the transmit period for the selected port. The transmit period is the value, in
(secs) seconds, of the timer used by the authenticator state machine on the specified port
to determine when to send an EAPOL EAP Request/Identity frame to the suppli-
cant. The transmit period must be a number in the range of 1 and 65535. The
default value is 30. Changing the value will not change the configuration until the
Submit button is pressed.
Guest VLAN ID Enter the Guest VLAN ID for the interface. The valid range is 0 to 4093.The default
value is 0. Changing the value will not change the configuration until the Submit
button is pressed. Enter 0 to clear the Guest VLAN ID on the interface.
Guest VLAN Period Enter the guest VLAN period for the selected port. The guest VLAN period is the
(secs) value, in seconds, of the timer used by the Guest VLAN Authentication. The guest
VLAN timeout must be a value in the range of 1 and 300. The default value is 90.
Changing the value will not change the configuration until the Submit button is
pressed.
Unauthenticated Enter the Unauthenticated VLAN ID for the selected port. The valid range is 0 to
VLAN ID 4093.The default value is 0. Changing the value will not change the configuration
until the Submit button is pressed. Enter 0 to clear the Unauthenticated VLAN ID
on the interface.
Supplicant Timeout Enter the supplicant timeout for the selected port. The supplicant timeout is the
(secs) value, in seconds, of the timer used by the authenticator state machine on this port
to timeout the supplicant. The supplicant timeout must be a value in the range of 1
and 65535. The default value is 30. Changing the value will not change the config-
uration until the Submit button is pressed.
Server Timeout Enter the server timeout for the selected port. The server timeout is the value, in
(secs) seconds, of the timer used by the authenticator on this port to timeout the authenti-
cation server. The server timeout must be a value in the range of 1 and 65535. The
default value is 30. Changing the value will not change the configuration until the
Submit button is pressed.
Maximum Requests Enter the maximum requests for the selected port. The maximum requests value is
the maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The
maximum requests value must be in the range of 1 and 10. The default value is 2.
Changing the value will not change the configuration until the Submit button is
pressed.
Re-authentication Enter the re-authentication period for the selected port. The re-authentication
Period (secs) period is the value, in seconds, of the timer used by the authenticator state
machine on this port to determine when re-authentication of the supplicant takes
place. The re-authentication period must be a value in the range of 1 and 65535.
The default value is 3600. Changing the value will not change the configuration
until the Submit button is pressed.
Re-authentication Click the drop-down menu to set the policy to True or False. If the value is 'true' re-
Enabled authentication will occur. Otherwise, re-authentication will not be allowed. The
default value is false. Changing the selection will not change the configuration until
the Submit button is pressed.
201