Advantech EKI-9312P Series, Руководство пользователя

Страница: 166 / 286

M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-103. Switching > QinQ > Interface Configuration
Parameter Description
Interface Click the drop-down menu to select the physical interface for which you want to dis-
play or configure data. Select 'All' to set the parameters for all ports to same values.
Interface Mode Click the drop-down menu to specify the administrative mode via which Double
VLAN Tagging can be enabled or disabled. The default value for this is Disable.
Submit Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Remove Click Remove to delete the selected Ether Type.
Interface Status
The DVLAN Interface Summary page displays the assigned mode and Ethertype for each
interface. To access this page, click Switching > QinQ > Interface Summary .
Figure 3-107. Switching > QinQ > Interface Summary
The following table describes the items in the previous menu.
Table 3-104. Switching > QinQ > Interface Summary
Parameter Description
Interface Displays the physical interface for which data is being displayed.
Interface Mode Displays the administrative mode via which Double VLAN Tagging can be enabled
or disabled.
154