Advantech EKI-9312P Series, Руководство пользователя

Страница: 251 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-184. QoS > Access Control Lists > IPv6 Access Control Lists > Rule
Configuration (Continued)
Parameter Description
Source Prefix/Prefix- Enter a value to specify the IPv6 Prefix--combined with IPv6 Prefix length of the
Length network or host from which the packet is being sent. Prefix length can be in the
range 0 to 128.
Source L4 Port Enter a value to specify a packet's source layer 4 port as a match condition for the
selected IPv6 ACL rule. Source port information is optional. Source port informa-
tion can be specified in two ways:
 Select keyword "other" from the drop down menu and specify the number of the
port in the range from 0 to 65535.

Select one of the keyword from the list: DOMAIN, ECHO, FTP, FTPDATA,
HTTP, SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values trans-
lates into its equivalent port number, which is used as both the start and end of
the port range.
Source L4 Port Enter a value to specify the first port of the port range for a packet's source layer 4
Range (start port) port match condition for the selected IPv6 ACL rule. Range of valid values is 0 to
65535. The value of the start port must be less than or equal to the end port. The
start port, end port, and all ports in between will be part of the contiguous source
port range. This is an optional configuration.
Source L4 Port Enter a value to specify the last port of the port range for a packet's source layer 4
Range (end port) port match condition for the selected IPv6 ACL rule. Range of valid values is 0 to
65535. The value of the end port must be greater than or equal to the start port.
The start port, end port, and all ports in between will be part of the contiguous
source port range. This is an optional configuration.
Destination Prefix/ Enter up to 128-bit prefix combined with prefix length to be compared to a packet's
PrefixLength destination IP Address as a match criteria for the selected IPv6 ACL rule. Prefix
length can be in the range 0 to 128.
Destination L4 Port Enter a value to specify the destination layer 4 port match conditions for the
Keyword selected IPv6 ACL rule. The possible values are DOMAIN, ECHO, FTP, FTPDATA,
HTTP, SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values translates
into its equivalent port number, which is used as both the start and end of the port
range. Either this field or the 'Destination L4 Port Range' fields can be used to
specify a destination layer 4 port range as a match criterion. This is an optional
configuration.
Destination L4 Port Enter a packet's destination layer 4 port number match condition for the selected
Number IPv6 ACL rule. This is an optional configuration.
Destination L4 Port Enter a packet's destination layer 4 port match condition for the selected IPv6 ACL
Range (start port) rule. This field identifies the first port of the port range and has a value from 0 to
65535. The value of the start port must be less than or equal to the end port. The
start port, end port, and all ports in between will be part of the contiguous source
port range. This is an optional configuration.
Destination L4 Port Enter a packet's destination layer 4 port match condition for the selected IPv6 ACL
Range (end port) rule. This field identifies the last port of the port range and has a value from 0 to
65535. The value of the end port must be greater than or equal to the start port.
The start port, end port, and all ports in between will be part of the contiguous
source port range. This is an optional configuration.
239