Advantech EKI-9312P Series, Руководство пользователя

Страница: 100 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-45. Management > ISDP > Statistics (Continued)
Parameter Description
Clear Click Clear to refresh the ISDP Statistics of all the interfaces.
Refresh
Click Refresh to update the data on the screen with the present state of the data in
the switch.
3.3.15 LLDP
Global Configuration
This section describes how to configure the Link Layer Discovery Protocol (LLDP). The
LLDP is a one-way, device discovery protocol that transmits attributes between devices
for the purpose of discovering the devices on the network.
To access this page, click Management > LLDP > Global Configuration .
Figure 3-48. Management > LLDP > Global Configuration
The following table describes the items in the previous menu.
Table 3-46. Management > LLDP > Global Configuration
Parameter Description
Transmit Interval Enter the interval in seconds to transmit LLDP frames. The range is from 5 to
32768 secs. Default value is 30 seconds.
Transmit Hold Multi- Enter the multiplier on Transmit Interval to assign TTL. The range is from 2 to 10
plier secs Default value is 4.
Re-Initialization Enter the delay before re-initialization. The range is from 1 to 10 secs. Default
Delay value is 2 seconds.
Notification Interval Enter the interval in seconds for transmission of notifications. The range is from 5
to 3600 secs. Default value is 5 seconds.
Submit
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Interface Configuration
This section describes the configuration function for the LLDP interface. The following
inter-face allows you to define the ports authorized to service LLDP.
88