Advanced Instruments 4250 Скачать руководство пользователя страница 54

Страница: 54 / 121

1. At

“

Select Language

”

, press

START

to display the current set-

ting.

2. Press

to select one of the available languages.

3. Press

ENTER

to store the new setting (or

STOP

to restore the

original setting).

14. Product/Test

Product/Test is for factory use only and has no field function.

15. Data Capture

Pressing

START

at this SETUP menu item will bring you into an

ON/OFF selection menu. When set to ON the freezing curve output

data will be presented to the serial port independent of the systems

one-way hold feature. This data is updated every 100 ms after crossing

0°C and may be captured with any RS-232 compatible computer pro-

gram for use in plotting freezing curves.

16. Assistance

Pressing

START

at this SETUP menu item will present you with infor-

mation on how to contact Advanced Instruments for supplies and ser-

vice. Important settings information which may be needed by our ser-

vice personnel will also be presented.

17. Set “Buzz” Amplitude
NOTE

The amplitude of the freeze pulse has been optimized by the

factory. Adjustment of this setting is recommended only under

the supervision of an authorized service technician.

This menu item displays the current “buzz” amplitude setting and

allows the setting to be changed. The number displayed has no unit of

measure and may vary from assembly to assembly.

1. At

“

Set Buzz Amplitude

”

, press

START

to display

“

Amplitude

= xxx

”

and activate a one-second freeze pulse.

Advanced

Cryoscope Model 4250 User’s Guide

Содержание 4250


























































































































Результаты поиска

Содержание 4250

Отзывы:

Бренды по названию

Популярные бренды

Advanced Instruments 4250, Руководство пользователя

Результаты поиска

Содержание 4250

Отзывы:

Бренды по названию

Популярные бренды