Total Access 238 Command Line Interface Guide
46
61200630L1-35C
IMA INTERFACE CONFIGURATION COMMAND SET
To activate the IMA Interface Configuration command set, perform the following steps:
1. Enter the Global Configuration Mode using the following command:
TA238#configure terminal
2. Enter the IMA Interface Configuration using the following command:
TA238(config)
#
interface ima 1
The following response is displayed:
TA238(config-ima1)#
The following commands are common to multiple command sets and are covered in a
centralized section of this guide. For more information, refer to the sections listed below:
•
•
All other commands for this command set are described in this section in alphabetical order.
•
•
•
•
•
•
•
•
•