ADEMCO VistaKey-SK, Инструкция по установке и настройке

Страница: 83 / 108

Section 6 – User Commands
6–9
↓
VISTA Card ID Number
001 Expire Month
NO EXPIRATION
00
Enter two digits from 00 to 15. The digits entered provide the
following expiration functions:
00 = Normal (no expiration) 08 = August
01 = January 09 = September
02 = February 10 = October
03 = March 11 = November
04 = April 12 = December
05 = May 13 = End of Day
06 = June 14 = End of Week (Sunday)
07 = July 15 = End of Month
NOTES:
•
Cards expire at midnight for month, end of day, end of week, and
end of month selections.
•
If you set a card to expire by time and also set the same card to
expire with use (“Expire Use?” above), then the card will expire on
the first event to occur.
Press [
✲
] to accept the entry.
If you entered 01-12, the system displays the “Day of Month”
prompt.
If you entered 00, or 13-15 the system advances to the “Vista User #”
prompt.
↓
VISTA Card ID Number
001 Day of Month
00
Enter day of the month. Note that the card
expires at midnight of the day that is
entered.
Press [
✲
] to accept the entry.
↓
VISTA Card ID Number
001 Vista User#
000
Enter a three-digit VISTA User #.
The VISTA user number may be used to allow a cardholder access
to an armed partition even if the cardholders access group is
restricted for that partition. Additionally, the VISTA User # can be
used to allow this cardholder to use wireless keyfobs to grant access
and egress through his allotted access points.
NOTES:
•
Cardholders with VISTA user number of 000 can disarm
partitions to gain entry if they belong to an access group that
doesn't have an Armed Restriction for that partition. See “Setting
Up Access Groups” in the Programming section of this manual for
more information.
•
The system only accepts VISTA user numbers that have been
defined prior to entering #79 Card Function Programming.
•
Cardholders with VISTA user number of 000 will be identified as
U999 if the trace option is selected.
•
The partition rights and privileges of the VISTA user assigned
should be consistent with the partition rights and privileges
assigned to the card and to the access group to which the card
belongs.
•
If you assign a VISTA user number to a cardholder and
subsequently delete that VISTA user number from the panel, the